5 initial start-up, 1 switching on, 2 function check – FRITSCH ANALYSETTE 3 PRO User Manual

Page 22: 3 switching off, 5initial start-up

Advertising
background image

5

Initial start-up

Perform initial start-up only after all work as described in Ä Chapter 4

‘Installation’ on page 19 has been carried out.

5.1 Switching on

n

The device must be connected to the power supply if this has not

been done already.

n

Switch on the device with the main switch on the back of the device.

n

The POWER lamp on the control panel lights up.

n

The displays show the default setting.

5.2 Function check

n

Clamp 2 test sieves (2) with clamping lid (1).

n

Set the amplitude to 2 mm (See Ä Chapter 6.7 ‘Setting the ampli‐

tude’ on page 32)

n

When everything is correctly clamped, start the function check with

"START".

Whether the set amplitude has been reached can be

checked on the display or on the amplitude plate on the lid.

5.3 Switching off

n

Press the STOP key and switch off the main switch.

Initial start-up

- 22 -

Advertising
This manual is related to the following products: