FRITSCH ANALYSETTE 3 PRO - Manual (Page 33)

6.9 Saving and invoking the settings
It is possible to save the amplitude settings: sieving time/grinding dura-
tion, interval length and MICRO on/off. There are 9 memory locations
provided for this.
n Save settings: Press SAVE key
n Invoke settings: Press PROGRAM key
When the PROGRAM key is pressed, the 9 memory locations appear in
turn and the settings are displayed.
6.10 Micro sieving
After pressing the MICRO key, a control lamp in the key lights up and the
amplitude is set to 0.1 mm. Now an amplitude of max. 0.5 mm can be
selected. Pressing the MICRO key again switches off the limit.
If the device is in operation, it cannot be switched to "MICRO" operating
mode.
If the device is operated with the settings of a memory loca‐
tion 1‐9, no settings can be changed during operation. If
program 0 is displayed on the display, settings can also be
changed during operation.
Using the device
- 33 -