FRITSCH ANALYSETTE 3 PRO - Manual (Page 15)

DANGER!
Explosion hazard!
– When Sieving oxidizable substances, e.g. metals or coal,
there is a risk of spontaneous combustion (dust explo-
sion) if the share of fine particles exceeds a certain per-
centage. When Sieving these kinds of substances, spe-
cial safety measures must be taken and the work must
be supervised from a specialist.
– The high-speed rotor mill is not explosion protected
and is not designed to sieve explosive materials.
n Do not remove the information signs.
NOTICE!
Immediately replace damaged or illegible information signs.
n Unauthorised alteration of the the ANALYSETTE 3 will void Fritsch's
declaration of conformity to European directives and void the guar-
antee.
n Only use the the ANALYSETTE 3 when it is in proper working order,
as intended and in a safety- and hazard-conscious manner adhering
to the operating manual. In particular, immediately rectify any mal-
functions that could pose a safety hazard.
n If, after reading the operating manual, there are still questions or
problems, please do not hesitate to contact our specialised per-
sonnel.
2.6 Protective equipment
Protective equipment is to be used as intended and may not
be disabled or removed.
All protective equipment is to be regularly checked for
integrity and proper functioning.
NOTICE!
– The toothed belts must only be released or clamped in
the switched off state.
– Before switching on again, ensure that the two toothed
belts are evenly, tightly clamped using the knurled
knobs.
Safety information and use
- 15 -