3 releasing the torquemaster, Accessories – FRITSCH ANALYSETTE 3 PRO User Manual

Page 37

Advertising
background image

CAUTION!
Follow the separate operating instructions of the cordless

screwdriver manufacturer. These are included with the

device.
When clamping, make sure to lift the TorqueMaster slightly

(illustration 1 + 2). If the toothed belt is not slightly ten-

sioned, it will be crushed in the TorqueMaster (illustration 3

+ 4).

7.4.3 Releasing the TorqueMaster

The TorqueMaster clamping device is also released with the cordless

screwdriver.
The clamping unit is released far enough so that it can be placed behind

the device without changing the toothed belt clamp in the belt clamping

device.
The clamped toothed belts on the belt clamping device is only released

or adjusted, when the number or height of the sieves in the sieve stack

changes.

Accessories

- 37 -

Advertising
This manual is related to the following products: