FRITSCH ANALYSETTE 3 PRO - Manual (Page 16)

2.7 Hazardous points
n Crushing hazard at the sieve tensioning system
n Crushing hazard between vibratory plate and housing
2.8 Electrical safety
2.8.1 General information
The main switch separates the device from the mains on two poles.
2.8.2 Protection against restart
After switching off at the main switch and switching on again, the START
key must be pressed for start-up.
2.8.3 Overload protection
The mains fuse provides overload protection.
Safety information and use
- 16 -