Using the stand, Using the stand -10, 1 before use – KEYENCE LK-HD1001 User Manual
Page 16: Attach the stand using the four m6 screws
Advertising
1-10
1
1 Before Use
Using the Stand
The separately sold stand (OP-84428) mounts to the rear side of the touch panel with
screws.
1
Attach the stand mounting panel to the rear side of the touch panel using the
four M4 screws.
2
Attach the stand using the four M6 screws.
• The stand mounting holes supports the VESA mounting standard for 75 x 75 mm.
• The stand mounting holes can be used to secure the touch panel to a desk or control cabinet.
TO CONT
ROLLER
24V DC
N.C
.
TO CONT
ROLLER
24V DC
N.C
.
Reference
Advertising