KEYENCE LK-HD1001 - Manual (Page 39)

2-21
2
2 Screen Functions and Operation
Environment Settings
This section explains how to configure the operating environment of the controller.
Touching "Envir" on the settings screen displays the "Environment settings" screen.
(1) Basic setting
No. of used heads
Sets the number of heads the controller can use.
No. of used OUT
Sets the number of OUTs the controller can use.
No. of used analog Ch
Sets the number of analog output channels the controller can use.
Panel lock
Sets whether to lock the display panel connected to the controller.
This setting takes effect after touching "Yes" and returning to the measurement screen.
Program Change
Specifies where programs will be changed from.
To use three or more OUTs by using the head expansion unit
Before taking any measurements, set the "No. of used heads", "No. of used OUT", and
"No. of used analog Ch". Changing the setting for the "No. of used heads" and "No. of
used OUT" initializes the other measurement settings.
(1)
(2)
(3)