KEYENCE LK-HD1001 - Manual (Page 33)

2-15
2
2 Screen Functions and Operation
Display/Analog
(1) Minimum display unit
Sets the decimal point position and number of digits to display for measured and setting
values.
Digits not displayed below the decimal point are rounded off.
These settings are initialized when the "Minimum display unit" setting is changed:
Scaling, offset, tolerance setting, analog output scaling, auto zero reference value.
(2) Analog output scaling
Displays the scaling for the analog output with respect to the measurement data.
Change
Touch to change the scaling reference values for the analog output.
The "Analog output scaling" dialog box appears. Enter the desired values and touch "OK".
Analog outputs can be scaled within a range of ±10.0 V.
(1)
(2)
Reference
NOTE
Reference