KEYENCE LK-HD1001 - Manual (Page 44)

2-26
2
2 Screen Functions and Operation
Measurement Value Display
This section explains the "Measurement value display" function available on the touch
panel.
Touching "Meas screen" on the settings screen displays the measurement screen.
(1) Setting scrn
Displays the settings screen (Page 2-2).
(2) Display the measurement data after applying simultaneous auto zero,
simultaneous reset, or simultaneous timing
Simul Zero
Applies auto zero simultaneously to the OUT with the OUTs set to synchronize.
Simul Reset
Resets the OUT simultaneously with the OUTs set to synchronize.
Simul TIM
Inputs the timing signal to the OUT simultaneously with the OUTs set to synchronize.
(3) Backlight
Turns off the touch panel backlight.
When the backlight is unlit, touching anywhere on the screen turns it on again.
(4) SW Dspl
Each touch switches the number of OUTs displayed.
(6)
(1)
(2)
(3)
(4)
(5)
(7)
(8)