Acura 2004 TSX - Owner's Manual - Manual (Page 134)

To store a frequency:
Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
You can store the
frequencies of your favorite radio
stations in the six preset buttons.
Each button will store one frequency
on the AM band, and two
frequencies on the FM band.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
button.
Pick the preset button you want
for that station. Press the button
and hold it until you hear a beep.
Repeat steps 1 to 3 to store a total
of six stations on AM and twelve
on FM.
Once a station’s frequency is stored,
simply press and release the proper
preset button to tune to it.
The preset frequencies will be lost if
your car’s battery goes dead, is
disconnected, or the radio fuse is
removed.
The SCAN function
samples all the stations with strong
signals on the selected band. To
activate it, press the SCAN button,
then release it. You will see SCAN in
the display. The system will scan up
the band for a station with a strong
signal. When it finds one, it will stop
and play that station for about 5
seconds. If you do nothing, the
system will then scan for the next
strong station and play that for 5
seconds. When it plays a station that
you want to continue listening to,
press the SCAN button again.
1.
2.
3.
4.
Preset SCAN
Audio System
Comf ort and Convenience Features 131
Main Menu Table of Contents