Acura 2004 TSX - Owner's Manual - Manual (Page 142)

When that disc ends, the next disc in
the CD changer is loaded and played.
After the last disc finishes, the
system returns to disc one.
Each time you press and
release it, the system skips forward
to the beginning of the next track.
Press and release
to skip
backward to the beginning of the
current track. Press and release it
again to skip to the beginning of the
previous track.
To move rapidly within a track, press
and hold the left or right side of the
SKIP bar. You will hear a beep and
the system will continue to move.
Press
to move forward, or
to move backward. Release the
bar when the system reaches the
point you want.
Select the CD changer by pressing
the CD button. You will see ‘‘CD’’ in
the display. The system will begin
playing the last selected disc in the
CD changer. You will see the disc
and track numbers displayed.
To select a different disc, press the
appropriate Preset button (1
6). If
you select an empty position in the
CD changer, the system will go into
the loading sequence (see page
).
You can use the SKIP bar while a
disc is playing to select passages and
change tracks.
This feature, when
activated, samples all the tracks on
the selected disc in the order they
are recorded on the CD. To activate
the Scan feature, select the Scan
mode by pressing the SCAN button.
You will see SCAN in the display.
The system will then play the first
track for about 10 seconds. If you do
nothing, the system will then play
the following tracks for 10 seconds
each. When it plays a track that you
want to continue listening to, press
the SCAN button again.
158
CONTINUED
Operation
Audio System
Comf ort and Convenience Features
SCAN
139
Main Menu Table of Contents