Vehicle stability assist (vsa) system – Acura 2004 TSX - Owner's Manual User Manual

Page 220

Advertising
background image

The VSA system indicator (see page

) comes on and stays on when

there is a problem with the VSA
system. The VSA Activation
indicator will also come on.

The VSA system indicator may come
on along with the ABS indicator if
there is a problem with the anti-lock
brake system.

If the VSA indicator comes on while
driving, pull to the side of the road
when it is safe and turn off the
engine. Reset the system by
restarting the engine, and watch the
VSA system indicator. If the
indicator remains on, or comes back
on while driving, have the VSA
system inspected by your Acura
dealer.

If the indicator does not come on
when the ignition switch is turned
ON (II), there may be a problem
with the VSA system. Have your
dealer inspect your car as soon as
possible.

When VSA is off, the VSA Activation
Indicator light comes on as a
reminder. Pressing the switch again
turns the system back on.

This switch is under the left vent.
Press it to turn the Vehicle Stability
Assist system on and off.

Without VSA, your car will have
normal braking and cornering ability,
but it will not have VSA traction and
stability enhancement.

61

CONTINUED

VSA System Indicator

Vehicle Stability Assist (VSA) System

Driving

VSA Of f Switch

217

VSA SYSTEM INDICATOR

VSA OFF SWITCH

Main Menu

Table of Contents

Advertising