Acura 2004 TSX - Owner's Manual - Manual (Page 292)

Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
Remove the burned-out bulb by
pulling it straight out of the socket.
Install the new bulb and reinstall
the socket. Make sure the new
bulb is working.
The license plate has two lights
above it. The bulbs should be
replaced by your Acura dealer.
1.
2.
3.
Replacing a High-mount Brake
Light Bulb Rear License Plate Bulb
Lights
Maintenance 289
Main Menu Table of Contents