Indicator lights – Acura 2004 TSX - Owner's Manual User Manual

Page 65

Advertising
background image

The appropriate light comes on in
this display if the trunk or any door
is not closed tightly.

All the lights in the monitor display
come on for a few seconds when you
turn the ignition switch to ON (II).

The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page

). Replace the bulb as

soon as possible, since other drivers
cannot see that you are signaling.

This indicator has three functions:

It comes on as a reminder that you
have turned off the Vehicle
Stability Assist (VSA) system.

It flashes when VSA is active (see
page

).

It comes on along with the VSA
system indicator if there is a
problem with the VSA system.

This indicator normally comes on for
a few seconds when you turn the
ignition switch to ON (II). See page

for more information on the

VSA system.

When you turn on the hazard
warning switch, both turn signal
lights blink, and all turn signals on
the outside of the car should flash.

1.

2.

3.

216

216

284

Indicator Lights

Instruments and Controls

Turn Signal and
Hazard Warning
Indicators

VSA Activation Indicator

Door and Trunk Open Monitor

62

Main Menu

Table of Contents

Advertising