Lights – Acura 2004 TSX - Owner's Manual User Manual
Page 288
Advertising
Pull the inner fender cover back.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
If you are changing the bulb on
the driver’s side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger’s side, turn
the steering wheel to the left.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
4.
5.
2.
1.
3.
CONTINUED
Lights
Maintenance
Replacing a Front Parking Light
Bulb
285
HOLDING CLIPS
Main Menu
Table of Contents
Advertising