Acura 2004 TSX - Owner's Manual - Manual (Page 255)

Loosen the drain plug on the
bottom of the radiator. The
coolant will drain through the
splash guard. Drain the coolant
into an appropriate container. Remove the two reserve tank
mounting bolts with a wrench.
Remove the reserve tank from its
holder by pulling it straight up.
Drain the coolant into an
appropriate container, then put the
tank back in its holder. Install the
mounting bolts securely.
When the coolant stops draining,
tighten the drain plug at the
bottom of the radiator.
3. 4.
5.
6.
Cooling System
Maintenance 252
HOLDER
RESERVE TANK
DRAIN PLUG MOUNTING BOLTS
Main Menu Table of Contents