Acura 2004 TSX - Owner's Manual - Manual (Page 168)

A new CD may be rough on the
inner and outer edges. The small
plastic pieces causing this roughness
can flake off and fall on the re-
cording surface of the disc, causing
skipping or other problems. Remove
these pieces by rubbing the inner
and outer edges with the side of a
pencil or pen.
To clean a disc, use a clean soft cloth.
Wipe across the disc from the center
to the outside edge.
When a CD is not being played, store
it in its case to protect it from dust
and other contamination. To prevent
warpage, keep CDs out of direct
sunlight and extreme heat. Handle a CD by its edges; never
touch either surface. Do not place
stabilizer rings or labels on the CD.
These, along with contamination
from fingerprints, liquids, and felt-tip
pens, can cause the CD to not play
properly, or possibly jam in the drive.
Never try to insert foreign objects in
the CD changer.
Protecting Compact Discs
Audio System
Comf ort and Convenience Features 165
Main Menu Table of Contents