Acura 2004 TSX - Owner's Manual - Manual (Page 289)

Pull the bulb straight out of its
socket.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Push the new bulb straight into
the socket until it bottoms.
Put the inner fender cover in place.
Install the holding clips. Lock each
one in place by pushing on the
center.
Remove the light assembly cover
by pulling its outside edge.
Remove the socket for that bulb
by turning it one-quarter turn
counterclockwise.
Turn on the parking lights to
make sure the new bulb works.
Open the trunk.
Determine which of the three
bulbs is burned out: brake/
taillight turn signal light or side
marker light.
1. 3.
2.
6.
7.
8.
4.
Replacing Rear Bulbs
(in Fenders)
Lights
Maintenance 286
COVER
Main Menu Table of Contents