Acura 2004 TSX - Owner's Manual - Manual (Page 140)

To load a single CD:
Press and release the LOAD
button.
The system will load the CD, and
begin playing it.
The disc number for an empty
position starts to blink and the
green CD load indicator comes on.
When you see ‘‘LOAd’’ in the
display, insert the disc into the CD
slot. Insert it only about halfway;
the drive will pull it in the rest of
the way.
When the CD load indicator turns
green and ‘‘LOAd’’ appears in the
display, insert the next disc into
the CD slot.
Repeat this until all six positions
are loaded. The system will then
begin playing the last CD loaded.
If you are not loading CDs into all six
positions, the system will begin
playing the last CD loaded.
To load multiple CDs:
Press and hold the LOAD button
until you hear a beep and see
‘‘LOAd’’ in the display, then
release the button.
On the center of the display, the
disc number for an empty position
will begin blinking and the green
CD load indicator will come on.
Insert a disc into the CD slot.
Insert it only about halfway; the
drive will pull it in the rest of the
way. You will see ‘‘BUSY’’ in the
display. The CD load indicator
turns red and blinks as the CD is
loaded. If you stop loading CDs before all six
positions are filled, and you do not
press the LOAD button, the system
will wait for 10 seconds, then stop
the load operation and begin playing
the last CD loaded.
1.
2.
3.
4.
5.
1.
2.
3.
CONTINUED
Loading CDs in the Changer
Audio System
Comf ort and Convenience Features 137
Main Menu Table of Contents