Emissions controls – Acura 2004 TSX - Owner's Manual User Manual

Page 346

Advertising
background image

The emissions control systems are
covered by warranties separate from
the rest of your car. Read your
warranty manual for more informa-
tion.

The emissions control systems are
designed and certified to work to-
gether in reducing emissions to
levels that comply with the Clean Air
Act. To make sure the emissions
remain low, you should use only new
Acura replacement parts or their
equivalent for repairs. Using lower
quality parts may increase the
emissions from your car.

The exhaust emissions controls
include three systems: PGM-FI,
Ignition Timing Control, and Three
Way Catalytic Converter. These
three systems work together to
control the engine’s combustion and
minimize the amount of HC, CO, and
NOx that comes out the tailpipe. The
exhaust emissions control systems
are separate from the crankcase and
evaporative emissions control
systems.

The PGM-FI System uses sequential
multiport fuel injection.
It has three subsystems: Air Intake,
Engine Control, and Fuel Control.
The Engine Control Module (ECM)
or the Powertrain Control Module
(PCM) uses various sensors to
determine how much air is going
into the engine. It then controls how
much fuel to inject under all operat-
ing conditions.

This system constantly adjusts the
ignition timing, reducing the amount
of HC, CO, and NOx produced.

The three way catalytic converter is
in the exhaust system. Through
chemical reactions, it converts HC,
CO, and NOx in the engine’s exhaust
to carbon dioxide (CO ), nitrogen
(N ), and water vapor.

2

2

Replacement Parts

Exhaust Emissions Controls

Emissions Controls

Technical Inf ormation

PGM-FI System

Ignition Timing Control System

Three Way Catalytic Converter

343

Main Menu

Table of Contents

Advertising