Acura 2004 TSX - Owner's Manual - Manual (Page 162)

Select the CD changer by pressing
the CD/AUX button. You will see
‘‘CD’’ in the upper display. The
system will begin playing the last
selected disc in the CD changer. You
will see the disc and track numbers
displayed.
When that disc ends, the next disc in
the CD changer is loaded and played.
After the last disc finishes, the
system returns to disc one.
You can use the SKIP bar while a
disc is playing to select passages and
change tracks.
To select a different disc, touch the
appropriate disc icon (1
6) or
press the ‘‘ ’’ or ‘‘ ’’ on the CH
DISC bar. If you use a disc icon to
select an empty position in the CD
changer, the system will go into the
loading sequence (see page
).
When you touch the TRACK SCAN
icon on the audio display, the first
track of the current CD plays for
about 10 seconds. You will see
TRACK SCAN highlighted in the
display (or SCAN in the upper
display). To hear the rest of the
track, touch TRACK SCAN again,
within 10 seconds. If you don’t, the
system advances to the next track,
plays about 10 seconds of it, and
continues through the rest of the
tracks the same way.
To move rapidly within a track, press
and hold ‘‘
’’ or ‘‘ ’’ on the SKIP
bar. The system will continue to
move through the track. Press
to
move forward, or to move
backward. Release the bar when the
system reaches the point you want.
Each time you press and release ,
the system skips forward to the
beginning of the next track. Press
and release
to skip backward to
the beginning of the current track.
Press it again to skip to the
beginning of the previous track.
157
Operation Track Scan
Audio System
Comf ort and Convenience Features 159
Main Menu Table of Contents