Cooling system – Acura 2004 TSX - Owner's Manual User Manual

Page 253

Advertising
background image

Turn the radiator cap counter-
clockwise, without pressing down
on it, until it stops. This relieves
any pressure remaining in the
cooling system.

Make sure the engine and radiator
are cool.

The coolant level should be up to
the base of the filler neck. Add
coolant if it is low.

Remove the radiator cap by
pushing down and turning
counterclockwise.

Put the radiator cap back on.
Tighten it fully.

Pour coolant into the reserve tank.
Fill it to halfway between the MAX
and MIN marks. Put the cap back
on the reserve tank.

Do not add any rust inhibitors or
other additives to your car’s cooling
system. They may not be compatible
with the coolant or engine compo-
nents.

Pour the coolant slowly and
carefully so you do not spill. Clean
up any spills immediately. Spilled
coolant could damage components
in the engine compartment.

3.

4.

5.

6.

2.

1.

Cooling System

Maintenance

250

RADIATOR CAP

RESERVE TANK

Main Menu

Table of Contents

Advertising