AERCO ProtoNode Gateway Rev 3 (with external LEDs) - Manual (Page 37)

AERCO ProtoNode Gateway
User Manual
OMM-0080_0H AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 37 of 126
GF-129 Ph.: 800-526-0288 11/06/2014
Figure 7-2: Entering Field Server IP Address
Figure 7-3: Selecting the Log Type
Step 2: Take a Log
Press the Take Log button. While the Utility runs a few DOS prompts will flash across the
monitor. Don't click or type anything in to these DOS prompts. This step may take a few
minutes depending on the chosen Log Type and computer speed. When the Utility is
finished you will be presented with a log of events that have occurred.
Type in the ProtoNode IP address
Default IP Address is 192.168.1.24
Press here to retrieve the IP address.
Select a log type.
Press the Take Log button.
Locate where the log is saved on the PC