AERCO ProtoNode Gateway Rev 3 (with external LEDs) - Manual (Page 5)

AERCO ProtoNode Gateway
User Manual
OMM-0080_0H AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 Page 5 of 126
GF-129 Ph.: 800-526-0288 11/06/2014
CHAPTER 1:
Introduction
AERCO’s multi-protocol communications gateway supports integration of AERCO devices with
customers’ building control and energy management systems. The plug-n-play package supports
integration with BACnet/IP, BACnet MS/TP, LonWorks, and Johnson Controls Metasys N2 systems.
AERCO’s Communications Gateway is available for all AERCO boilers, water heaters, and electronically
controlled indirect systems.
• Built-in translation for BACnet/IP, BACnet MS/ TP, LonWorks, Metasys N2 and Modbus TCP
Protocols
• Supports individual units and systems including AERCO’s WHM and BST.
• Select protocol and baud rate in the field using simple DIP switch selection
• Captures alarm and trend history for faster troubleshooting
• Non-volatile memory retains point mappings and programs in the event of power loss.
• Approvals: BACnet Testing Labs (BTL) B-ASC on ProtoNode RER, CE Mark, LonMark 3.4
Certified on ProtoNode LER, TUV approved to UL 916
FIGURE 1-1: Dimensions for ProtoNode LER (left) and RER (right)