GE C2S985SETSS - Manual (Page 19)

GEAppliances.com
For best results when roasting large
turkeys and roasts, we recommend
using the probe included in the
convection oven.
C onvection
R oast
0 0 0 0 0
0
0 0 0 0
Cownm Loaour
P robe
0 0 0 0 0
0 0 0 0 0
COMnOL LOOEOUr
S tart
C lear
O ff
How to Set the Upper Oven for Convection Roasting when Using the Probe
(on some models)
The display will flash PROBE and the oven
control will signal if the probe is inserted into
the outlet, and you have not set a probe
temperature and touched the Start pad.
[y] Place the rack in the rock position (A).
Insert the probe completely into the food.
Plug the probe into the outlet in the oven.
Make sure it is pushed all the way in. Close
the oven door.
~J] Touch the Convection Roast pad.
Touch the number pads to set the desired
oven temperature.
Touch the Probe pad.
Touch the number pads to set the desired
internal food temperature.
To change the oven temperature during the
Convection Roast cycle, touch the Convection
Roast pad and then touch the number pads to
set the new desired temperature.
yi Touch the Sfort’pad.
When the oven starts to heat, the word LO will
be in the display.
After the internal temperature of the food
reaches 100°F, the changing internal
temperature will be shown in the display.
When the internal temperature of the
food reaches the number you have set,
the probe and the oven turn off and the
oven control signals. To stop the signal,
touch the Ciear/Off pad. Use hot pads to
remove the probe from the food. Do not
use tongs to pull on it—they might
damage it.
s
ACAUTiON
To prevent possible
burns, do not unplug the probe from the oven
outlet until the oven has cooled. Do not store the
probe in the oven.
NOTE:
■ If the probe is removed from the food before
the final temperature is reached, a tone will
sound and the display will flash until the
probe is removed from the oven.
■ You will hear a fan while cooking with this
feature. The fan will stop when the door is
opened but the heat will not turn off.
■ You can use the timer even though you
cannot use timed oven operations while
using the probe.
19