Installing the wire extensions, Connecting the unit to a power outlet, Installing the wire extensions -4 – Brother INTELLIFAX 600 User Manual
Page 23: Connecting the unit to a power outlet -4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION
Installing The Wire Extensions
1) Pinch the ends of the receive wire extension together slightly and insert
the prongs into the holes provided at the rear of the machine as shown in
the illustration.
2) Pull the ends of the document wire extension apart slightly and insert them
into the holes provided on the machine as shown in the illustration.
•
ImtaU^mreextemionswdhtheaffvedparisofthewireextension
poin^ibwnmird.
Connecting The Unit To A Power Outlet
Important
The machine must always be connected to the power outlet
before you connect it to a telephone line.
Similarly, when moving the unit, the telephone line
connection should be removed before unplugging the
power cord. This is because the machine relies on the
ground from the plug to protect you from any hazardous
electrical conditions occuring on the telephone network.
The IntelliFAX600/650M can be plugged into any standard, grounded,
power outlet.
2-4