Making a copy, Making a copy -6, Basic operation – Brother INTELLIFAX 600 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATION
Making A Copy
The IntelliFAX600/650M can be used as a convenience
copier. Once you have unpacked and set up the machine, it’s
a good idea to make a trial copy to check that the machine is
working, before attempting to send and receive faxes.
After the IntelliFAX600/650M has been connected to the
power outlet and has warmed up, the date/time display will
appear when there is no document in the feeder.
C O P Y : P R E S S C O P Y
1
ALTERNATE |
F A X ;
N O . & S T A R T
To make a copy, place the document you wish to copy,
face-down, in the document feeder, and feed it in gently until
you feel some resistance. You can copy any document up to
8.5 inches/216 mm wide (A4 size).
When the IntelliFAX600/650M detects the document, the
display will change from the date and time.
□ c
To prevent the document from skewing as it is fed, adjust the
paper guides to fit the width of the document.
- b- FINE
^ I-7 PHOTO
-O- S.FINE
C
The default setting for making copies is SUPER FINE.
If you are copying a photograph, press the RESOLUTION key
until both lamps are lit. If you are making several copies, some
with photographs, set the resolution page by page in I.TEMP.
SETTINGS, (see page 8-9.)
COPY
Press the COPY key.
C O P Y I N G
The display will indicate that the machine is copying, and the
document will be fed through the machine.
Note:
- When the copy has been printed, the automatic paper cutter
will cut the page from the paper roll,
- The machine cannot read text or images closer than 1/8" from
any edge of the document.
- Do not pull on the paper while copying is in progress. This
may ruin the copied image.
3-6