Brother INTELLIFAX 600 - Manual (Page 31)

BASIC OPERATION
10, Right Cursor
11. Call Reservation
pressing the right cursor key scrolls the function down to the
next item, or moves the cursor one place to the right on the
display when data is being entered.
CALL
C I
This key is used to enable the call reservation feature.
12, Timer
TIMER
13. Polling
The TIMER function is used when you wish to perform delay
sending of a fax, or polling, until a later time. For more
information on timer operation see page 12-1.
POLUNG
14. Interrupt
Polling allows you to call up another fax machine and have it
send you a fax that has been left in its document feeder, or
allows you to leave a document in your IntelliFAX600/650M
for another machine to poll. For more information on polling see
page 11-1.
INTERRUPT
15. Function
If you wish to send an urgent fax after the timer has been set,
pressing the INTERRUPT key will temporarily interrupt the
timed job.
FUNCTION
C ...... )
16. Resolution
Pressing the FUNCTION key puts the IntelliFAX600/650M
into "function mode", which is used for less frequently used
operations such as configuring the machine and storing dial
numbers. For more information on using the functions see page
4-1.
• FINE
I— PHOTO
• S.FLNE
c
This key sets the resolution at which a fax is transmitted. For
more information see page 8-5.
When both lights are lit, then unit is in photo mode. When no
lights are lit, then unit is in standard mode.
3-4