Brother INTELLIFAX 600 - Manual (Page 59)

SYSTEM SETUP
F A X : 0 6 1 3 3 0 5 5 2 0
SET
CZZZZ]
Using the numeric keypad, enter your fax number (which can
have up to 20 digits).
Press the SET key to confirm the entry.
You will now be prompted to enter your telephone number.
If you have a telephone on a different line, enter your telephone
number. If your IntelliFAX600/650M and telephone share the
same line, enter the same number again up to 20 digits.
SET
Press the SET key to confirm the entry.
You will be prompted to enter your name.
Enter your name or the name of your company (up to 20
characters) in the way described in the section of Using The
Numeric Keypad To Enter Text (page 4-5).
SET
4 . S T A T I O N I D
Press the SET key to confirm the entry.
The display will revert to 4.STATION ID. If you want to
change another system setting press a number key, otherwise
press the STOP key to exit.
Note;
-The telephone number is only used for the Call Back
Messages and super COVERPAGE features.
- If you do not enter a fax number, no other information can
be entered.
'You cannot enter a using the PAUSE key when
registering your fax and telephone number. Use the (<— / —>)
cursor keys instead to enter a space. It will be printed as “ ”,
but will not be displayed.
6-7