Automatic fax reception, Automatic fax reception -2, Receiving fax and other calls – Brother INTELLIFAX 600 User Manual
Page 86
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECEIVING FAX AND OTHER CALLS
If you hear the calling tone of another fax machine when you
lift the receiver, press the START key on your IntelliFAX600/
650M immediately.
R E C E I V I N G
Your IntelliFAX600/650M will begin to receive the incoming
fax message.
You may then replace the telephone receiver.
Automatic Fax Reception
*
AUTOANS
f—MD
•
f/T
I ............
If you have a telephone line dedicated to fax use, and you
require automatic reception of all calls, you should use the fax
auto-answer mode.
Press the ANSWER MODE key until the "AUTO ANS" lamp
is lit.
All incoming faxes will then be received automatically,
without any manual intervention.
R E C E I V I N G
When a fax is being received, the display will show the
message RECEIVING.
You should also set the RING DELAY to "0" (zero), so that
the IntelliFAX600/650M will answer incoming calls with no
ring delay. See page 5-3 for information on how to do this.
You may also connect a telephone to this line, but you will
only be able to make outgoing calls, as the IntelliFAXbOO/
650M will answer all incoming calls automatically.
9-2