Brother INTELLIFAX 600 - Manual (Page 49)

SETTING THE USER OPTIONS
S.Smoothing
This is a unique Brother feature that enhances the appearance
of any received fax by smoothing out "jagged edges" on lines
and text. More detailed information about smoothing is given
on page 9-7.
5 . U S E R O P T I O N S
r\
6 . S M O O T H I N G
SET
S M O O T H I N G : O N
\ ALTERNATE \
S E L E C T & S E T
To switch smoothing on or off;
After selecting the USER OPTIONS, press the 6 key.
6.SMOOTHING will appear in the display, then press the SET
key.
An alternating display will prompt you to change the
smoothing setting between OFF and ON using the cursor keys,
then press the SET key.
<— —» If you wish to change the current setting, press one of the cursor
CZZZZZ]
OR
I
) keys, otherwise press the SET key to exit.
SET
! ~1
6 , S M O O T H I N G
O0 0
000
O 0 0
G00
OR C
Press the SET key.
The display will revert to 6.SMOOTHING.
If you want to set another user option, press a number key,
otherwise press the STOP key to exit.
Note:
- Smoothing is done by the receiver and adds no additional
communications time. It is usually set to "on".
5-7