Brother INTELLIFAX 600 - Manual (Page 64)

AUTO DIALING
You can register numbers with up to 20 digits.
Chain dialing are registered the same as any other number except
that you register the type as a chain. See page 7-4 and 7-6.
Storing Auto Dial Numbers
Auto dial numbers can be stored by selecting function item 4
- SET AUTO DIAL, then choosing either ONE-TOUCH
DIAL or SPEED-DIAL from the options presented.
As well as the fax or telephone number, you can also store the
name of the destination, which will be displayed as a check
when you dial the number using one-touch or speed-dialing.
Using The Redial/Pause Key
When storing anto dial numbers, yon will n.se the numeric keypad
to enter numbers and text as described earlier.
If your IntelliFAX600/650M is connected to a PBX, you may
need to insert a code for outside line access before each fax or
telephone number that you store in the memory. For example,
if your code for outside line access is "9", you will need to store
"9" as the first digit of every fax or telephone number in the
auto dialing memories.
If yonr PRX returns secondary proceed indication (in other
words, if you have to wait for "outside dial tone" before
dialing, after accessing an outside line) the PAUSE button
should be used.
During storage of auto dial numbers, pressing the PAUSE
button between the outside line access code and the rest of the
number displays a dash on the LCD, for example
9-0613306531.
When dialing using the auto dial number, this builds in 3.5 second
delay, needed to allow time for the outside telephone exchange to
prepare for dialing after the access code has been dialed.
Only one pause can be inserted into a number, so if you need more
than a 3.5 second delay, please contact your Brother service who
can adjusts the pause period.
Storing One-touch Dial Numbers
FUNCmiV Press the FUNCTION key.
7-2
■0
Press the 4 key to access the SET AUTO DIAL function.