Brother INTELLIFAX 600 - Manual (Page 65)

AUTO DIALING
4 . S E T A U T O D I A L 4.SET AUTO DIAL will be displayed, then press the SET key.
The display will begin to scroll through the sub-function items
that are available for 4.SET AUTO DIAL.
©
1 . O N E - T O U C H D I A L
SET
[Z...... I
S E L E C T O N E - T O U C H
5 : B R O T H E R
ALTERNATE
1 . C H A N G E 2 . E X I T
0
Press the 1 key to access the ONE-TOUCH DIAL function,
then press the SET key.
You will be prompted to select a one-touch key.
Press the one-touch key to which you wish to assign a number.
If the one-touch key is already in use, you will be asked if you
wish to change it or exit and select a different one-touch
number. This display does not appear if the one-touch key you
chose is not assigned.
Press 1 to assign a new number to the one-touch key, or press
2 to choose a different one-touch key.
5 :
ALTERNATE
E N T E R & S E T
5 : 0 6 1 3 3 0 6 5 3 1
SET
You will be prompted to enter the fax or telephone number of
the destination. If you are replacing an existing number with
a new one, the old number will appear in the display. Press the
CLEAR key to erase the old number.
Enter the number, using the numeric keypad (with can have up
to 20 digits).
Press the SET key.
N A M E ;
i
ALTERNATE
1
E N T E R & S E T
You will be prompted to enter the name of the destination.
If you are replacing an existing name with a new one, the old
name will appear in the display. Press the CLEAR key to erase
the old name.
For information on using the numeric key pad to enter text,
please read the section on Using The Numeric Keypad To
Enter Text.
7-3