Brother INTELLIFAX 600 - Manual (Page 45)

SETTING THE USER OPTIONS
2.Ring Delay
This option sets the number of rings before the
IntelliFAX600/650M will answer an incoming call when set
to AUTO ANS or F/T mode.
If you do not wish to be disturbed by incoming fax calls, it is a
good idea to set this to "0" (zero) so that no Ring Tones will
be heard.
OR
5 . U S E R O P T I O N S
"0
2 . R 1
N Q D E L A Y
SET
i_________ i
R I N G D E L A Y : 0 4
1 ALTERNATE |
S E L E C T < > & S E T
To set the ring delay;
After selecting the USER OPTIONS, press the 2 key.
2.RING DEUAY will appear in the display, then press the SET
key.
R I N G D E L A Y : 0 2
An alternating display will prompt you to select the ring delay
using the cursor keys, then press the SET key.
If you wish to change the current setting, press one of the cursor
keys, otherwise press the SET key to exit.
As soon as you press a cursor key, the display will stop
alternating and only the selection line will be displayed.
SET
L I
2 . R I N G D E L A Y
OR r ) Use the cursor keys to select 0, 1,2, 3 or 4 rings.
Press the SET key.
The display will revert to the 2.RING DELAY display.
O 0 ©
O 0©
©00
O ©0
OR c
If you want to set another user option, press a number key,
otherwise press the STOP key to exit.
5-3