Brother INTELLIFAX 600 - Manual (Page 98)

USING THE TIMER
12. USING THE TIMER
The InteIliFAX600/650M has a built-in timer linked to the
clock. This allows you to leave a document in the
IntelliFAX600/650M for later transmission, for example, in
the evening, when telephone lines are less busy and call
charges are lower. This is known as delayed transmission.
Setting up a transmission on the timer is just like setting up a
job to be carried out immediately, except that you must also
set the timer. Then, when you have set up the job and press the
START key, the job will not be carried out immediately, but
at the time you have set on the timer.
Delayed Sending
To set up the IntelliFAX600/650M for delayed sending:-
i
dOi
Place the document to be sent in the document feeder.
F A X : N O . & S T A R T
TIMER
S E T T I M E = 0 0 : 0 0
O O 0
0 0©
0 0©
O © 0
C O P Y : P R E S S C O P Y
1
ALTERNATE
t
You will be prompted to press the COPY key, or to enter a fax
number and press START. As you wish to set the timer, ignore
this message.
Press the TIMER key.
If you set the daily timer when you configured the machine,
this time will be shown in the display. If you wish to use the
time that is already set on the daily timer, simply press the SET
key.
Otherwise, enter the time at which you wish the document to
be sent.
SET T I M E = 2 1 : 3 5
SET
\ 1
Press the SET key.
12-1