Brother INTELLIFAX 600 - Manual (Page 25)

INSTALLATION
Jacks
If you have the older 4-prong telephone wall jack, you must use a modular
4-prong adapter (USOC RJAIX). Plug the adapter into the wall jack and then
plug the telephone cord into the adapter, as shown in the illustration below.
Multi Line Connections (PBXs)
Most offices use a central telephone system. While it is often relatively simple
to connect the machine to a key system or a PB X (private branch exchange),
wc suggest that you contact the company which iiisLalled your téléphoné
system and ask them to connect the fax machine for you.
It is advisable to have a separate line for the fax machine. You can then leave
the machine in AUTO ANSWER mode to receive faxes at any time of the
day or night.
If the fax machine is to be connected to a multi-line system, ask your installer
to connect the unit to the last line on the system. This will prevent the unit
from being activated each time a telephone call is received.
• As with all fax units this machine must be connected to a two wire
system. If your line has more than two wires proper connection of the
fax machine can not be made.
Connecting To A Private Branch Exchange____________
The following points should be kept in mind if you are installing the machine
to work with a private branch exchange (PBX).
1) It is not guaranteed that the unit will operate correctly under all
circumstances with PBXs. Any cases of difficulty should be reported first
to the company that handles your PBX.
2) If all incoming calls will be answered by a switchboard operator, it is
recommended that the AUTO ANSWER function be set to be manual.
(see page 9—1) All incoming calls should initially be regarded as
telephone calls.
3) The unit may be used with either the pulse or tone dialing telephone types.
2-6