Automatic insertion, Manual insertion – Brother WP330MDS User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Insert paper as shown.
Automatic insertion
PINS
iP BREAK
Press P INS to automatically advance the paper
to the printing position (one inch from the top).
To change that position, use CODE + P UP or
CODE + P DOWN.
Manual Insertion
Rotate the platen knob to advance the paper.
If the paper is not properly aligned, advance the
sheet half way, push the paper release lever
toward the rear and manually match the corners
of
the paper. Pull the paper release lever
back to
its original position and turn the platen knob until
the paper is in the desired position.
10
Advertising