Computer system requirements, Installing and starting from your hard disk drive – Brother WP330MDS User Manual
Page 258
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing and Starting the Brother
Conversion Software
We recommend that you make a copy of the Brother Conversion Software diskette
before you start the installation. You can work from the copy made, and keep the
original diskette in a safe place in case it is needed in the future.
Computer System Requirements
The Brother Conversion Software runs under MS-DOS on any IBM-PC, PC/AT, PS/2
and compatible computer. The computer must have at least one floppy disk drive, a
hard disk drive, and 512 KB or more of memory.
If your system has a color monitor, the program automatically uses it to the best
advantage.
Installing and Starting from Your Hard Disk Drive
To install the Brother Conversion Software on your hard disk drive, power up your
computer as usual, and get the C> prompt. Then insert the Brother Conversion
diskette in your disk drive, default to that drive (either A: or B:) and type INSTALL.
For example;
C>A:
A>INSTALL
This starts the installation program which automatically creates a subdirectory, on
your C: drive, named “BROTHER”, and copies all necessary files into that
subdirectory.
The installation program also creates a batch file, on your C; drive, called
“CONVERT.BAT”.
Each time you want to start the Brother Conversion Software, type the command
CONVERT at the C> prompt.
For example:
C>CONVERT
Then after a brief opening screen, the main menu screen appears.
248