Note – Brother WP330MDS User Manual
Page 302
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TWAVP
LAYOUT
Turn the power on and use TW/WP to switch the
word processor to the Typewriter application.
(SPACE BAR)
fr.
BACKSPACE
BSI
Use SPACE BAR and BACKSPACE to move the
carrier to the center of the platen.
Lift the acoustic cover and remove the ribbon
cassette, if installed. (See “Changing Ribbons” on
page 290.)
NOTE:
It is not possible to move the carrier while the
acoustic cover is open. Close the acoustic
cover to re-position the carrier.
Grasp the spools with your thumbs in the
positions shown and pull them off their mounts.
Bring the tape back to a position parallel with the
platen and then lift it up and out.
Pass the new tape through the left guide, behind
the ribbon guide, and out through the right guide.
The rough side of the tape should face the platen.