Brother WP330MDS - Manual (Page 45)

Subscripts and Superscripts
The word processor allows you to enter and print subscripts and superscripts. The
procedure parallels what you would do on a typewriter, except that instead of
physically rotating the platen, you press CODE + P DOWN and CODE + P UP.
NOTES:
• Characters in subscript and superscript are displayed below or above the base
line.
• The word processor prints subscripts and superscripts the same distance (1/12
inch) below or above the line, regardless of the current line spacing.
Try to enter “e=mc^''.
1 . Type “es=mc”.
2. Press CODE + P DOWN.
3. Type 2.
4. Press CODE + P UP.
NOTES:
• To enter subscripts, proceed in the same way as above, but reverse the CODE -#•
P DOWN and CODE + P UP keys.
• Each pair of keys (CODE + P DOWN and CODE + P UP j cancels the other, and
the two pairs must always be used in combination. If you try to press one of the
pairs more than once, the word processor beeps.
Extra Characters
The extra characters are those marked in green on your keyboard (for example, V’).
To enter such a character, hold CODE down and press the character key.
NOTE:
If a green character appears on the right of a key (for example B), it means that
the character is available only with KB II (international keyboard).
35