Notes, Note, Diskette utility functions – Brother WP330MDS User Manual
Page 91
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Type your text (name and address in our example). This will not be stored in
memory. The remainder of the file will, however, be reformatted to accommodate
the inserted text.
5. Press CODE + P (PRINT) to resume printing.
NOTES:
• Stop codes are ignored and replaced as a space if you select PRINT PAGE from
the WRITE/EDIT Screen. They are only effective during file printing through
the
WP INDEX
screen.
You can print the file
as
many times as
required,
each
time inserting different information.
• When printing has temporarily stopped after a stop code has been encountered,
the printing mode may be canceled entirely by pressing CANCEL, at which time
the display will return to the WP INDEX screen.
• When a stop code for direct typing is encountered at the end of the text area
defined in the
P SIZE
setting (54 lines is default) and additional typing will exceed
this setting, a beep will sound and the word processor will go into PAGE END
status. The following message will appear on the display:
Page end. r*Tcaa CORRECT to type one more line.
NOTE:
In order to type one more line, press CORRECT and begin typing. Or press
P INS to change to a new page.
Diskette Utility Functions
To help you keep your document files in order, there are utility functions for discarding
out-of-date files and making copies. (See also “Initializing New Diskettes” on
page 17.)
NOTES:
•
The following doaoriptiono all assume that you have saved your current
document and are already at the WP INDEX screen. (See “Saving a File” on
page 73.)
• The functions that are available in the WP INDEX screen are displayed when you
press MENU.
81