Accessories, Changing daisy wheel cassette, Note – Brother WP330MDS User Manual
Page 299: Accessories changing daisy wheel cassette
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Accessories
Changing Daisy Wheel Cassette
This word processor uses Brother daisy wheel cassettes, which are print elements
housed in clear plastic. I his ensures that fingers will never touch the typeface, thereby
reducing the risk of damage. One wheel comes with the word processor. Others
providing different type sizes, styles, and character sets are also available.
NOTE:
If the cassette is not inserted properly or the daisy wheel is not locked in position,
there may be no printout, the printout may be gibberish, or the wheel may break.
Lift the acoustic cover, and then release the daisy
wheel by pulling the lever toward you.
NOTE:
It is not necessary to remove the ribbon when
replacing the daisy wheel.
Remove the cassette by the “eaK’ on the top right.
Slide the new cassette into the slot.
NOTE:
Use only Brother Cassette Daisy Wheels and
make sure the cassette is not inserted
backwards. (The “ear" should be on the right.)
Be sure to slide the lever back to its original
position to lock the daisy wheel in place. Press the
lever forward once more to assure the daisy
wheel is properly set, and close the acoustic
cover.
289