Gigabit ethernet module connectors and leds, Table 2-3 – Cisco 11500 Series User Manual
Page 72
Chapter 2 Cabling the CSS
Cabling the CSS 11503 and CSS 11506 Modules
2-16
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03
describes the FEM LEDs and their indications.
Note
If all of the FEM Link and Duplex LEDs blink synchronously, the module has
failed.
Gigabit Ethernet Module Connectors and LEDs
The Gigabit Ethernet Module (GEM), model CSS5-IOM-2GE, contains two
1000-Mbps SFP GBICs with LC-type connectors. The GEM can use either:
•
Longwave-length SFP GBICs (CSS5-GBIC-LX). The longwave length
transceiver (1000BASE-LX) can reach 550 meters for all multimode media
types. For single-mode fiber, the distance is 5,000 meters.
•
Shortwave-length SFP GBICs (CSS5-GBIC-SX). The transceiver distance
can reach from 220 meters to 500 meters, depending on the quality of the
fiber.
Warning
Because invisible radiation may be emitted from the aperture of the port when
no fiber cable is connected, avoid exposure to radiation and do not stare into
open apertures.
Table 2-3
Fast Ethernet Module LED Descriptions
LED Name
Color
State
Indicates
Link
Green
Off
No link established
On
Link established but no activity
Blinking
Link established with transmit or receive
activity
Duplex
Green
Off
Port is operating at half duplex
On
Port is operating at full duplex