Cisco 11500 Series - Manual (Page 82)

Chapter 2 Cabling the CSS
Connecting the Power Cord
2-26
Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03
Connecting the Power Cord
The CSS 11500 series models are powered by either an AC or DC power supply.
Before you install the AC or DC power cord, ensure that you have read
Appendix A,
Specifications , for information on the electrical specifications. The
following sections describe:
• Connecting a CSS 11501 Power Cord
• Connecting a CSS 11503 Power Cord
• Connecting a CSS 11506 Power Cord
• Checking the DC Power Connection (CSS 11503 and CSS 11506)
Connecting a CSS 11501 Power Cord
To connect an AC power cord to a CSS 11501:
1. At the rear of the chassis, ensure that the CSS power switch is in the O (off)
position.
2. Plug the AC power cord connector into the CSS power connector, as shown
in
Figure 2-11 .
Figure 2-11 Connecting a CSS 11501 AC Power Cord
1 AC power connector 2 Power switch
78677
2
1