Toshiba TEC MA-1060-100 Series User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RTN
MDSE
RETURNED MERCHANDISE KEY
This key is the Returned Merchandise Key which is used for refunding
money to a customer who has returned goods to the store.
To operate, depress the | RTN MDSE I key either before or after ringing
up the amount to be refunded, and then depress the appropriate depart-
ment key (the department key may be replaced by a PLU code and the
I
FLU
I
key combination). The amount is automatically printed and
deducted from the bill.
The IRTN MDSE I key can be used outside as well as inside a sale.
1#7ÑS|
NON-ADD NUMBER PRINT / NO-SALE KEY
This is a dual-function key that has both
functions.
and
I NS
I
key
If depressed with a prior number entry, it will function as the Non
add Number Print key. (See "[#] KEY" on page 19.)
If depressed without a prior numeric entry, it will function as No
sale key. (See “ [NS| KEY" on page 19.)
It also function as the Cash-in-drawer Read key if depressed in the
"X"
mode.
It
functions
the
same
as
the
key
in
programming
operations.
LC
OPEN
LISTING CAPACITY OPEN KEY
This key is used to release the listing capacity on each Department
or finalizing (media) key. To operate, depress the i~LC OPEN| key
before depressing the department or finalizing key (either before
or after the numeric entry).
By depressing the
1
LC OPEN
I
key, the HALC (High Amount Listing
Capacity) will be released to allow a numeric entry with two further
digits, and the LALC (Low Amount Listing Capacity) will be one digit
less than the programmed value, as to the department keys. As for
the finalizing keys, the HALC will be extended to allow one further
digit.
In order to allow a numeric entry outside the values defined above,
the Mode Lock must be turned to the 'MGR* position using the MA or
MGR Key.
Repeat operation will be possible on any department key even when
the ILC
open
) key is depressed before the department key.
rA»m AMOUNT KEY
This key is used to enter an amount or price for an open PLU,
to the description for the "IPLUI key on page 9.
Refer
- 7 -