Printer motor lock detector – Toshiba TEC MA-1060-100 Series User Manual
Page 111
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ECR PRINTER MOTOR LOCK AND REMOTE SLIP PRINTER MOTOR LOCK DETECTORS
1. PRINTER MOTOR LOCK DETECTOR
(1) This detects the ECR printer motor lock condition caused by some
trouble.
(2) When such a condition is detected, the front display indicates
"Error" and none of the keys (including | RF ] and fJF"! ) wi 11 be
accepted.
(3) To regain the normal condition, turn the power of the ECR to OFF,
remove the cause of the motor lock, and then turn the power to
ON again.
2. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR
(1) This detects the remote slip printer motor lock condition caused
by some trouble.
(2) When such a condition is detected, the front display indicates
"Error" and none of the keys (including |RF | and fjF | ) will be
accepted.
(3) To regain the norma 1 condition, turn the powers of the ECR and
the remote slip printer to OFF, remove the cause of the motor
lock, and then turn the powers to ON again.
*
* If the cause can not be found in the remote slip printer and only
the ECR may be required to work without the remote slip printer
temporarily, remove the remote slip printer cable from the ECR,
and turn the power of the ECR to ON.
- 1 0 7 -