Toshiba TEC MA-1060-100 Series - Manual (Page 70)

CONDITION: Any time outside a sale
OPERATION: Mode^Lock: SET or MGR
STORE NAME/MESSAGE AND COMMERCIAL MESSAGE PROGRAMMING
Mode Lock: SET
or
Mode Lock: MGR "SÉTI
rVlLine No.
(1 ~ 3)
or
(1 ~ 7)
Repeat for the next character.
regular-sized
character
---- ^ i@/FORI-
one double-sized
character
I
@/F0R
I
|@/F0R1-
•>! Character Code|-^l~FI
{2 or 3 digits;
see the table
on page 96 .)
for spacing instead
of a character
Entire line with all
double-sized characters
> [Sfl - - - - » I
AT/TL
I
to end each line.
{If any space is
left unprogram-
in the line end,
it will automati­
cally be program­
med as space.)
NOTES: 1. The f¥] key after the Character Code entry may be replaced by
the 1#/CIDI or i#/NSl key.
2. For one line, a maximum of 16 regular-sized characters or 8
double-sized characters may be entered. A combination of both
types is also available.
3. If "Store Name/Message FIXED" is selected in the system option,
no data can be programmed for the store name/message (and the
store name stamp will be printed instead); therefore, enter 1
through 3 for each line of commercial message.
If "Store Name/Message PROGRAMMABLE" is selected in the system
option, enter 1 through 4 for the store name/message and 5
through 7 for the commercial message.
4. If no commercial message is required on the receipt, program
all space for all the three lines. Then no message will be
printed an no exti'a line space will be fed. If any one of the
three lines is ever programmed, the two other lines will remain
programmed with space and will turn out to be extra space lines
to be fed on the receipt.
5. The 4-line space assigned for the store name/message will be
either printed (if programmed) or fed (if all space is program­
med), but will never be shortened when a receipt is issued, as
long as "Store Name/Message PROGRAMMABLE" status is selected in
the system option.
- 66 -