Toshiba TEC MA-1100-400 SERIES - Manual (Page 10)

FUNCTION OF EACH KEY
ON
9
U
O F F
RECEIPT
RECEIPT ON/OFF SWITCH
This switch has two positions available — 'OFF' position and 'ON'
position. When in the 'OFF' position, no receipt is issued from the
register and sales are printed on the audit roll only. When the
switch is turned to the 'ON' position, sales are printed on both the
receipt roll and audit roll, then a receipt is issued which is auto­
matically cut off and given to the customer.
[ rf ] receipt feed key
This key is used to advance the receipt roll. It is operated by
depressing the key and holding it in that position until the paper
has advanced to the required position. This key is effective even
when the RECEIPT ON/OFF SWITCH is in the 'OFF' position. It can be
programmed to prohibit receipt feeding during a sale.
fjFl JOURNAL feed KEY
This key is used to advance the audit roll in the same fashion as
the RF key. These two keys are useful if the casher, due perhaps
to an interruption whilst ringing up a sale, is unsure which items
have already been entered. By using the feed key the cashier can
see which figures have actually been printed.
The RF and JF keys can not be operated simultaneously.
VALI
DATE VALIDATION KEY
This key is used to over-print a validation slip.
To operate, after registering an item or finalizing a sale, insert
a slip into the validation slot and depress the
I
VALIDATE
I
key. The
item and the amount will be printed on one line on the slip. Print
or non-print of the date and/or consecutive No. is a programmable
option.
Programmable selections are also provided as to single or multi
validation, validation compulsion on certain transaction keys, etc.
If the SEP Lamp flashes, it means that validation compulsion is
programmed for the last item entered. In this case, insert a slip
into the validation slot and depress the IVALlDAral key; no other
operation is allowed until the compulsory validation has been executed,
When a Media Key is programmed with Validation Compulsory status,
the drawer will open after executing a validation print of the media.
The 1AT/TLI key is also subject to this rule if programmed with
Validation Compulsory status.
- У