Toshiba TEC MA-1100-400 SERIES - Manual (Page 23)

If the "Total Validation Compulsory" option has been selected, the
Total Validation operation will always be required before finalizing
any sale.
The IAT/TLI key is also used to finalize received-on-account payments
or paid-out amounts.
The rAT/TLi key can be programmed with the HALC (High Amount Listing
Capacity) of the amount tendered. If the HALC has been set, the
amount tendered must not exceed the programmed value; otherwise, it
will result in an error. If the ILC OPE^j key is used prior to the
IAT/TLI depression, the HALC will be extended by one additional digit.
If an amount still larger must be entered, the MA or MGR key is
required to turn the Mode Lock to the MGR position.
|Wi SUB-TOTAL KEY
This key is used to obtain the sub-total amount during a sale. When
this key is depressed after all the items have been rung up, the sub­
total of the seale is printed and displayed.
If the
I
ST
j
key is depressed more than once consecutively , the first
depression only will print and display the sub-total; further
depressions will only display but not print the sub-total amount.
The system option provides the selection not to print but only display
the sub-total even on the first depression of the |ST
I
key.
Mandatory depression of this key prior to finalizing is a programmable
option.
In charge posting, a depression of the
amount without previous balance.
key displays the sub-total
iTRFj TRANSFER KEY
When a charge posting operation is ended with the |^hg| key, this
key is used to transfer the entire balance with no payment.
To operate, depress the ITOFI key after the IChgI key. All the
balance is transferred, the transferred amount is printed as the new
balance, and a receipt is issued. When the amount is less than 7
digits, the figures are printed in double-sized characters.
tSI/TL| SELECTIVE ITEMIZER TOTAL KEY
This key is used to display and print the selective itemizer content.
To operate, depress the ISI/TLI key without a numeric entry during
a sale. At this time the content of the selective itemizer is cleared
The
I
ITEM CQRR| key does not function to delete the |SI/TL| key entry.
- 19 -