Toshiba TEC MA-1100-400 SERIES - Manual (Page 13)

If the I %+1 key is used immediately after a previous balance entered
through the IPB+1 key^ the percent rate is added to the previous
balance. But the
l
%-1 key cannot be used in this case. Neither may
the 1%+i or
\%~\
key be used immediately after a previous balance
entered through the |PB-| key.
FLU I PLU (Price-Look-Up) KEY
This key is used to enter a PLU that is linked to a department. Each
PLU can be programmed to be preset PLU (to allow the preset price
entry only) or an open PLU (to allow a price entry through the numeric
keys each time).
TO ENTER THROUGH PRESET PLU:
PLU Codel rpLUl ..
1~3 digits
The preset price will automatically
be read and entered.
to repeat the same PLU price, depress
the IPLUI only, after the above
operation.
TO ENTER THROUGH OPEN PLU:
PLU Code! ■
1~3 digits
EÜ] PRICE AMT
.... The price indexed on the numeric keys
will be entered.
To repeat the same PLU price, depress
the IAMTI key only, after the above
operation.
As for quantity extension and split pricing involving PLUs, refer
to the "REGISTERING PROCEDURE FOR SALES".
Each PLU is programmed with a 3-digit PLU Code, a 2-digit linked
Department Code, and if used as a preset PLU, a maximum of 6-digit
preset price (5-digit for UK and BE versions). Each PLU is also
programmed with the S.I. or non-S.I, status.
IIC/VP] ITEM CORRECT / VOID KEY
This is a dual-function key that has both I ITEM CORRI (item Correct)
and ¡VOIDI (Designated Line Void) key functions. (These two keys
can separately be installed as optional keys inplace of the jIC/VDl
key.)
ITEM CORRECT FUNCTION:
If depressed (without a prior numeric entry) after an item-
correctable entry, it functions as Item Correct key, removing the
last item from the bill and printing a etched lined through that
item on the receipt and journal.
The item-correct function is effective even when a numeric entry
and a [c] key depression are done between the department entry to
be corrected and the IIC/VD1 key depression.
- 9 -